歡迎訪問濟南科爾超聲波設備有限公司網站！

專注生產工業用超聲波清洗機

讓工業清洗無難事

業務咨詢電話：

18663767799

你所在位置：首頁-新聞動態-新聞資訊多槽超聲波清洗機的水冷散熱方式

新聞資訊

多槽超聲波清洗機的水冷散熱方式

作者：admin來源：http://www.xsjtl.com/時間：2022-05-11

隨著清洗行業的不斷發展，越來越多的行業和企業使用了超聲波清洗設備。那么多槽超聲波清洗機的水冷散熱方式是怎樣的呢？

With the continuous development of cleaning industry, more and more industries and enterprises use ultrasonic cleaning equipment. So what is the water cooling and heat dissipation mode of multi tank ultrasonic cleaning machine?

超聲波在液體中傳播，使液體和清洗槽一起以超聲波頻率振動。當液體和清洗槽振動時，它們有自己的固有頻率。這個振動頻率就是聲波的頻率，所以人們聽到嗡嗡聲。

The ultrasonic wave propagates in the liquid and makes the liquid vibrate with the cleaning tank at the ultrasonic frequency. When the liquid and cleaning tank vibrate, they have their own natural frequency. This vibration frequency is the frequency of sound waves, so people hear buzzing.

超聲波馬達彈性振動體的振動速度和摩擦傳遞能量的方式?jīng)Q定了它是低速馬達，其能量密度約為電磁馬達的5-10倍，所以它確實不需要減速機構。扭矩可以直接驅動執行器。因此，高能量密度也會導致超聲波在散熱不良的情況下內部過熱，直接影響性能的穩定性。

The vibration speed of the elastic vibrating body of the ultrasonic motor and the way of friction transmitting energy determine that it is a low-speed motor, and its energy density is about 5-10 times that of the electromagnetic motor, so it does not need a deceleration mechanism. Torque can drive the actuator directly. Therefore, high energy density will also lead to internal overheating of ultrasonic in the case of poor heat dissipation, which will directly affect the stability of performance.

因為超聲波清洗機需要在很多環境中使用，所以有時需要對噪音的處理非常謹慎。這就要求散熱方面的噪聲不能太高。而且我們都知道，在使用風冷散熱時，風扇會隨著熱量的增加而加快轉速，這樣噪音就會很大。另外，風扇散熱容易積塵，對內部環境和元器件造成不良影響。

Because ultrasonic cleaning machines need to be used in many environments, it is sometimes necessary to be very careful with the treatment of noise. This requires that the noise of heat dissipation should not be too high. And we all know that when using air cooling for heat dissipation, the fan will speed up with the increase of heat, so the noise will be very loud. In addition, the fan heat dissipation is easy to accumulate dust, which has an adverse impact on the internal environment and components.

清洗液體經超聲波輻射，液體分子發生振動，這種振動加速度在28KHZ時是重力加速度的103倍，在950KHZ時將達到105倍，由這個強力加速度可以對受污物的表面實行剝離清洗。然而，950KHZ的超聲波不產生空穴，不適應去油污的清洗，只能在電子工業的半導體制造中，對亞微米粒子的污染進行清洗。

When the cleaning liquid is radiated by ultrasonic, the liquid molecules vibrate. This vibration acceleration is 103 times of the gravity acceleration at 28kHz and 105 times at 950khz. The surface of the dirt can be stripped and cleaned by this strong acceleration. However, 950khz ultrasonic does not produce holes and is not suitable for degreasing cleaning. It can only clean the pollution of submicron particles in the semiconductor manufacturing of the electronic industry.

當強力的超聲波輻射到液體中，清洗液以靜壓(一個標準氣壓)為中心進行變化，在壓力到零氣壓以下時，溶解在液體中的氧會形成微小氣泡核，進而產生無數近似真空的微小空洞(空穴)。超聲波的正壓力時的微小空洞，在絕熱壓縮狀態被擠碎，這個發生在擠碎瞬間的強力沖擊波，可直接破壞污染物并使之分散在液中，形成清洗機理。

When the strong ultrasonic wave radiates into the liquid, the cleaning liquid changes with the static pressure (a standard air pressure) as the center. When the pressure is below zero air pressure, the oxygen dissolved in the liquid will form tiny bubble cores, and then produce countless tiny cavities (holes) similar to vacuum. The tiny cavity under the positive pressure of ultrasonic wave is crushed in the adiabatic compression state. This strong shock wave at the moment of crushing can directly destroy the pollutants and disperse them in the liquid to form a cleaning mechanism.
超聲波清洗設備

試驗中這種強力的清洗作用，能在數十秒內對鋁箔侵蝕成無數的小孔。利用空穴作用的清洗，對去油污的效果比較好，通常在28KHZ~50KHZ的頻率內進行機械另部件的清洗，清洗機的超聲波強度大多設定在0．5~1w／cm2。

In the test, this powerful cleaning effect can erode the aluminum foil into countless small holes in tens of seconds. Cleaning by using the action of holes has a good effect on degreasing. Usually, another mechanical part is cleaned at the frequency of 28kHz ~ 50KHz. The ultrasonic intensity of the cleaning machine is mostly set at 0.5 ~ 1W / cm2.

多槽超聲波清洗機更好的冷卻方式是水冷，在眾多的散熱方式中，水冷已經開始出現。卓越的散熱效果，靜音模式，綠色安全穩定，大大改變了以往的散熱方式。在很多領域都采用了水冷散熱，加速了水冷散熱的發展。超聲波清洗機也不例外，很多公司已經開始采用這種冷卻方式。未來更多的設備會引入水冷散熱。

The better cooling mode of multi tank ultrasonic cleaning machine is water cooling. Among many cooling modes, water cooling has begun to appear. Excellent heat dissipation effect, silent mode, green, safe and stable, which has greatly changed the previous heat dissipation mode. Water cooling is adopted in many fields, which accelerates the development of water cooling. Ultrasonic cleaning machine is no exception, many companies have begun to use this cooling method. In the future, more equipment will introduce water cooling and heat dissipation.

多槽超聲波清洗機的水冷散熱方式便是以上所講解內容了，如果您對這方面很感興趣的話不妨來我們網站www.xsjtl.com查看資訊吧。

The water cooling and heat dissipation mode of multi slot ultrasonic cleaning machine is the content explained above. If you are very interested in this aspect, you may wish to visit our website www.xsjtl.com Check out the information.

上一篇：超聲波清洗機可用于模具塑殼的清洗工作
下一篇：超聲波清洗機清洗效果好要知道注意事項