單工位旋轉噴淋清洗機主要用零部件過程清洗，加工完成后，立即放入該清洗機清洗，然后再轉入下道工序。剛加工完的產品清洗難度相對較低，清洗再轉序可保證工作環境的清潔。當然，該機也可用于某些零件特殊工藝需求的清洗。

Single-station rotary spray cleaning machine is mainly used for parts process cleaning. After processing, it is immediately put into the cleaning machine for cleaning, and then transferred to the next process. The cleaning difficulty of the newly processed products is relatively low, and the cleaning process can ensure the cleanness of the working environment. Of course, this machine can also be used for cleaning some parts with special process requirements.

單工位旋轉噴淋清洗機由清洗的腔室、存放液體的儲液箱、清洗泵及附助裝置組成，門的前部通道具有垂直氣動門。腔內有固定工件的平臺，人工可直接將工件放置在平臺上，采用自動方式固定工件防止清洗時工件在水沖擊下移位。也可根據需求設計其它的功能

The single-station rotary spray cleaning machine is composed of a cleaning chamber, a liquid storage tank, a cleaning pump and an auxiliary device. The front channel of the door has a vertical pneumatic door. There is a platform for fixing the workpiece in the cavity. The workpiece can be directly placed on the platform manually. The workpiece can be fixed automatically to prevent the workpiece from shifting under water impact during cleaning. Other functions can also be designed according to requirements

腔門設置合理，封閉性好，通過雙手控制單元和氣動“防墜落”安全系統，門完全安全地關閉。

The chamber door is set reasonably and closed well. The door can be closed completely and safely through the two-handed control unit and the pneumatic "fall prevention" safety system.

單腔式噴淋清洗機以噴淋清洗為主，大壓力可達2MPa,溫度可達80℃，清洗液循環使用。有些特殊設計壓會更高。可以從控制面板手動設置洗滌時間和液體溫度。

The single-chamber spray cleaning machine is mainly used for spray cleaning, with high pressure up to 2MPa and temperature up to 80 ℃, and the cleaning fluid is recycled. Some special designs have higher pressure. The washing time and liquid temperature can be set manually from the control panel.

噴咀可采用定位方式，有針對性的沖擊某個區域，達到完全清洗的目的。清洗完成后再通過壓縮空氣，吹去工件表面大量水分，即完成清洗過程。

The nozzle can be positioned to impact a specific area to achieve complete cleaning. After cleaning, a large amount of water on the surface of the workpiece is blown away by compressed air, which completes the cleaning process.

該機控制系統采用PLC控制，人機界面顯示，溫度、時間等參數可據需要調整。有低液位保護。各工藝參數及動作有聯鎖保護，確保清洗機在設定的程序及參數下正常運行。有故障記錄及報警提示。

The machine control system adopts PLC control, man-machine interface display, temperature, time and other parameters can be adjusted as needed. There is low level protection. All process parameters and actions are interlocked to ensure the normal operation of the washing machine under the set procedures and parameters. There are fault records and alarm prompts.

腔體及儲液箱等與液體接觸的地方均采用不銹鋼SUS304材料制做，泵及閥、管路等過流部分均采用不銹鋼SUS304材料。流體過濾采用大流量精密過濾器，共有三級過濾裝置。

The cavity and liquid storage tank and other places in contact with the liquid are made of stainless steel SUS304 material, and the pump, valve, pipeline and other overflow parts are made of stainless steel SUS304 material. High flow precision filter is adopted for fluid filtration, and there are three stages of filtration device.

以上就是單工位旋轉噴淋清洗機的信息講解內容了，您對此還有怎樣的問題或者需求嗎？歡迎來我們網站www.xsjtl.com進行了解！

The above is the information of the single-station rotary spray cleaning machine. Do you have any questions or requirements? Welcome to our website www.xsjtl.com!